The Aggregator Commission Math Every Architect Should Run
A ₹25 lakh residential project can look like a healthy ₹1.875 lakh design fee — until you subtract the platform's cut, GST, and tax, and see what actually lands in the architect's account.
Rohan had been designing homes for nine years out of a two-room studio in Pune. When a design-aggregator app started sending him project leads, it felt like a lifeline — no more cold calls, no more waiting for a builder friend to refer a client. Eighteen months later, he sat down with his accountant to figure out why a year of near-constant project work had left his savings roughly where they started. The answer wasn't a mystery once he actually laid out the math: the platform that brought him the client had also quietly kept a large share of what the client paid for design.
This is not a story about any single company behaving badly. It is a story about arithmetic that most solo architects and small studios never run explicitly, because the leads keep arriving and the invoices keep getting paid. This article walks through the commission math — the real, worked numbers — so you can decide for yourself how much of your practice you want to run through a platform that takes a cut before you ever see a rupee.
How Design Aggregators and Lead Platforms Actually Monetise in India
India's home-design and interior aggregator space has grown into an organised, well-funded industry precisely because it solves a genuine discovery problem: homeowners don't know how to find a good architect or designer, and professionals don't know how to reliably find homeowners who are ready to hire. Platforms step into that gap and charge for the introduction — but the business model matters enormously to how much of it lands in your pocket.
Some platforms charge a flat referral fee per qualified lead, win or lose. Others take a percentage of the final signed project value, which aligns their incentive with getting you hired but also means the bigger the project, the bigger their absolute cut. A third model — increasingly common among full-stack design-and-execution platforms — doesn't just refer the client, it inserts itself into the entire production chain: design, material sourcing, vendor coordination, and execution, capturing margin at every step rather than a single referral fee.
The most instructive public data point on this last model comes from Livspace, one of India's best-known full-stack home-interior platforms. According to Business Review Live's analysis of Livspace's FY25 financials, the company reported revenue of ₹1,460 crore in FY25 at a gross margin of roughly 51.5% (Business Review Live, Livspace FY25 financial analysis). That margin figure is instructive, not an indictment — a platform of that scale has genuine costs to cover: sales, vendor management, quality assurance, technology, warranty support. But it is a clear signal that in a full-stack aggregator model, a substantial share of what the end client pays for their home is captured by the platform layer sitting between the client and the designers, vendors, and contractors who do the actual work. If you're an architect or designer whose revenue flows through a similar full-stack arrangement, that same structural margin is very likely being taken out of your side of the transaction before you see it.
None of this is unique to India, and none of it makes aggregators inherently bad for your practice — a percentage of a project you would never have found on your own is still money you wouldn't otherwise have earned. The problem is architects who never run the number, and so never notice when the trade stops being worth it.
The Commission-Math Framework: Gross Fee → Take-Rate → Tax → Net-Per-Hour
Here is the framework, step by step, that turns a vague feeling of "the platform takes too much" into a number you can actually act on.
Step 1 — Establish your gross design fee. The Council of Architecture's statutory scale of charges sets a benchmark fee of 7.5% of construction cost for residential work and 5% for non-housing projects (Council of Architecture, State-wise Registered Architects, 01 Jul 2026). In practice, many independent architects and studios negotiate around this benchmark rather than adhering to it strictly, but it remains the reference point most clients and platforms implicitly anchor to. Use whatever your actual quoted fee percentage is; for this walkthrough we'll use the COA benchmark of 7.5% on a residential project.
Step 2 — Subtract the platform take-rate. Whatever the aggregator's commission structure — flat fee, percentage of project value, or margin embedded in a full-stack arrangement — convert it to a single percentage of your gross fee. This is the number platforms are often least transparent about, so ask directly, in writing, before you accept a lead.
Step 3 — Layer on GST. As a professional service provider, you are very likely charging (and remitting) 18% GST on your design fee, on top of whatever the client pays. This does not change your net income directly, but it does change your cash-flow timing and your invoicing math — many solo architects mistakenly compute their "take-home" before separating out the GST component they're merely collecting on behalf of the government.
Step 4 — Subtract income tax on your actual profit. After platform commission and after separating out GST, what remains is your gross professional receipt. From that, deduct your real costs — site visits, drafting software, junior staff time, printing, travel — to get your taxable profit, and then apply your effective income-tax rate.
Step 5 — Convert to net-per-hour. This is the step that changes decisions. A project that nets you ₹1 lakh after everything sounds fine until you count the 80 hours of design iterations, client calls, site visits, and platform-mandated status updates it consumed. Net-per-hour is the number that tells you whether a channel is actually profitable or just busy.
Worked Margin Comparison: Direct Client vs Aggregator-Sourced Project
The table below walks the same framework across three project sizes, comparing a direct client relationship (no platform commission, but you bear your own marketing cost) against an aggregator-sourced project at an illustrative 25% platform take-rate — a figure in the broad range that full-stack design and services platforms in India are commonly reported to operate at, and one every architect should verify against their own platform's actual contract terms rather than assume.
| Construction cost | Design fee at 7.5% (COA scale) | Direct-client net (after ~10% own marketing/referral cost) | Aggregator-sourced net (after 25% platform take-rate) | Difference |
|---|---|---|---|---|
| ₹25 lakh | ₹1,87,500 | ~₹1,68,750 | ~₹1,40,625 | ~₹28,125 less via aggregator |
| ₹50 lakh | ₹3,75,000 | ~₹3,37,500 | ~₹2,81,250 | ~₹56,250 less via aggregator |
| ₹1 crore | ₹7,50,000 | ~₹6,75,000 | ~₹5,62,500 | ~₹1,12,500 less via aggregator |
These figures are illustrative modelling based on the COA statutory fee scale (coa-architects) and a representative platform take-rate; your own contract terms, negotiated fee percentage, and actual marketing costs will differ, and you should rebuild this table with your real numbers before drawing conclusions. What the table illustrates structurally, though, holds regardless of the exact percentages: the gap between direct and aggregator-sourced net income grows in absolute rupee terms as project size grows, even though the percentage gap stays constant. On a ₹1 crore home, a 25-point difference in take-rate is over a lakh of rupees — often more than the entire fee on a smaller project.
Metro vs Tier-2 Lead Economics
Aggregator penetration and lead cost are not uniform across India, and the commission math changes meaningfully by geography.
In metros like Bengaluru, Mumbai, and the Delhi NCR belt, aggregator and full-stack platform density is highest — homeowners are more likely to have already encountered a platform brand through advertising before they think of an independent architect, which pushes more transaction volume through the commissioned channel and makes direct-referral discovery harder to sustain on its own. India's residential-architecture supply is also concentrated and competitive: the Council of Architecture's state-wise registry counts 141,707 registered architects nationwide (coa-architects), and a large share of that competition clusters in metro markets, which compresses what any individual architect can negotiate as a fee percentage and makes platform-sourced volume feel more necessary.
In tier-2 cities — Coimbatore, Nagpur, Bhubaneswar, Indore, and similar markets — aggregator penetration is thinner, WhatsApp and word-of-mouth referral chains are stronger relative to platform discovery, and the cost of building a direct reputation is lower because there's simply less noise to cut through. Architects in these markets often report that a handful of well-executed, well-photographed local projects generate more referral volume than any paid discovery channel — but they also have fewer aggregator options if they do want manufactured lead flow, so the "aggregator vs direct" decision is less about ideology and more about which channel actually reaches enough qualified homeowners in a smaller market.
The GST and income-tax layer described above applies uniformly regardless of city, but it interacts differently with take-home in tier-2 markets, where overall fee quantums tend to be smaller — meaning a fixed-percentage platform commission eats a larger relative share of an already-thinner margin.
A Solo Architect's Full Year of Aggregator Numbers
Consider a composite, illustrative solo architect — call her Meera, running a one-person practice in a tier-2 city — who took on eight residential projects over a year, four sourced through a design-aggregator app and four sourced directly through referrals and a modest Instagram presence.
Her four aggregator-sourced projects averaged ₹40 lakh in construction cost, generating gross design fees around ₹3 lakh each at her negotiated rate — but after the platform's take-rate, GST set-aside, and her actual project hours (which ran higher than expected because the platform's client-communication protocol required weekly update calls she hadn't budgeted time for), her real net-per-hour on those four projects came out lower than her four direct projects, even though the direct projects were, on paper, slightly smaller in total fee value.
The lesson Meera took from actually running the numbers for a full year wasn't "cut off the aggregator" — the volume it brought her was real and some of those clients would never have found her otherwise. It was that she needed to treat the platform as one channel among several, price her aggregator-sourced quotes slightly higher to absorb the take-rate, and invest deliberately in the direct channel so it could eventually carry a larger share of her pipeline without her being dependent on any single source of leads.
When Aggregator Dependence Is Defensible — and When It Quietly Bankrupts a Practice
Aggregator dependence makes sense when you are early in your practice and have no reputation or referral network yet, when a platform's take-rate is transparent and modest relative to the volume and quality of leads it sends, or when you deliberately use it as a training ground for smaller projects while you build your direct-client capability in parallel.
It becomes a quiet drain on the practice when you can no longer answer, off the top of your head, what percentage of your revenue comes from platform-sourced work; when you've stopped tracking net-per-hour separately for aggregator vs direct projects; when the platform's terms have changed (a rate hike, a new mandatory service fee) and you kept accepting leads anyway because you'd become dependent on the volume; or when you realise you have no functioning direct-referral pipeline at all, so leaving the platform isn't actually an option even if the math no longer works.
Pro Tips for Protecting Your Margin
- Get the take-rate in writing before your first project, not after — ask specifically whether it's a flat referral fee, a percentage of signed value, or a margin embedded in a full-stack execution model.
- Price aggregator-sourced quotes slightly higher than your direct-client rate to absorb the platform's cut without eroding your own net, where the platform's terms permit independent pricing.
- Track net-per-hour separately for aggregator-sourced and direct-sourced projects every quarter — this is the single number that tells you whether a channel is still worth it.
- Blend channels deliberately rather than accidentally — treat aggregators as a volume-and-visibility tool early on, and reinvest a portion of that revenue into building a direct-discovery presence you fully control.
- Protect the client relationship post-handoff wherever your contract allows it, since a satisfied client's next referral — a friend's home, a relative's renovation — should be able to reach you directly rather than back through the platform.
Common Mistakes That Undercount the True Cost
- Ignoring the tax layer entirely — computing "take-home" as gross fee minus platform commission, without separating GST and applying real income tax, systematically overstates what actually lands in the bank.
- Undercounting rework and status-update hours that platform-mandated processes often add — these hours are real and they lower your effective hourly rate even when the headline fee looks fine.
- Having no direct channel at all, so that even after running the numbers and realising the aggregator's take-rate is too high, there's no alternative source of clients to fall back on.
- Comparing percentage take-rates in isolation instead of absolute rupee amounts — a 25% cut on a ₹1 crore project is a materially bigger loss than the same percentage on a ₹25 lakh project, and pricing decisions should reflect that.
- Assuming every platform's economics resemble a specific public example — the Livspace FY25 margin figure is one data point about one company's business model, not a universal aggregator benchmark; always get your own platform's actual terms rather than assuming a specific take-rate applies to you.
Building Direct Discovery Instead of Renting Resold Leads
The core structural difference worth understanding is between a lead marketplace — which resells access to homeowner attention and takes a commission for the introduction, project after project — and a discovery platform that lets a buyer find you directly and reach out without an intermediary fee sitting inside the transaction. DrawMagic's professionals directory is built as the latter: a public, buyer-facing presence where residential architects create a discoverable profile without their inquiries flowing through a per-lead commission model.
The distinction matters operationally, too. Instead of a platform pushing curated leads to you at its own cadence and taking a cut of whatever gets signed, DrawMagic surfaces your profile within the buyer-facing professional discovery experience, where homeowners already researching their project browse architects directly and initiate contact themselves — a first-party, consented inquiry rather than a resold introduction. If you want to understand the platform-only model underpinning this — no broker fee, no commission layer inserted into your client relationship — DrawMagic's how the platform works page lays out the mechanics plainly: it connects buyers and professionals; it does not sit inside your fee.
The Value Trade: Building a Direct-Discovery Presence vs Recurring Per-Lead Spend
Building out a complete, well-maintained profile on a directory takes a few hours upfront and periodic updates — a fixed, largely one-time-per-refresh cost. A recurring per-lead or percentage-of-project commission, by contrast, is a cost that compounds with every single project for as long as you depend on that channel, as the worked table above shows. The trade-off isn't that one approach is right and the other wrong — it's that most architects have never quantified the recurring cost side of that comparison, which is exactly why running the commission math matters before you decide how much of your pipeline should depend on it.
Key Takeaways
- Run your own commission math using gross fee, platform take-rate, GST, and real income tax — don't estimate your net take-home informally.
- The COA statutory scale (7.5% residential, 5% non-housing) is the reference benchmark for computing your gross design fee before any platform cut is applied.
- Full-stack design platforms like Livspace can operate at gross margins around 51.5% (FY25, per Business Review Live) — a reminder that platform-layer margin is a real structural cost, not a myth.
- The absolute rupee gap between direct and aggregator-sourced net income grows with project size, even when the percentage take-rate stays fixed.
- Metro markets have deeper aggregator penetration and more competition among India's 141,707 COA-registered architects; tier-2 markets often favour direct referral relationships.
- Track net-per-hour separately for aggregator-sourced vs direct-sourced projects each quarter — it is the clearest signal of whether a channel is still worth the commission.
- Aggregator dependence is defensible early in a practice or as a controlled volume channel; it becomes risky when it's your only channel and you've stopped tracking its real cost.
- Building a direct-discovery presence on a buyer-facing directory is largely a one-time effort, compared to a commission that recurs on every aggregator-sourced project indefinitely.
- Never assume one company's or one platform's reported take-rate applies to your specific contract — always confirm your own terms in writing.
FAQ
Is a 25% aggregator take-rate typical in India? Take-rates vary widely by platform and business model — flat referral fee, percentage of signed value, or margin embedded in full-stack execution. There is no single industry-standard number; always confirm your specific platform's terms in writing rather than assuming a benchmark applies to you.
Does listing on a buyer-facing directory replace all other client discovery? No — most architects benefit from blending channels. A directory presence like DrawMagic's professionals listing reduces dependence on commissioned lead channels but works best alongside referrals and your own reputation-building.
How do I start building a direct-discovery presence? Sign up to create a professional profile, then complete it fully so it's ready for homeowners browsing DrawMagic's buyer-facing professional discovery surface to find and contact you directly.
Enjoyed this read? Join our YouTube channel for continuous discovery.
Subscribe on YouTubeRelated Articles
Productivity for the Architect Team of One
A solo Indian architect's real bottleneck usually isn't design skill — it's the twelve unpaid hours of admin standing between a signed brief and a livable income.
Generating Floor-Plan Options Faster for Clients
The four words that quietly erode an architect's margin are not about fees or scope — they're 'can we see two more options,' asked at concept stage, for free.
Winning Projects With Mood Boards and Early Renders
Two architects pitch the same brief with the same technical competence — the one who shows a picture instead of a plan is usually the one who gets the signature.
Ready to visualise your dream home?
Use AI to generate floor plans, transform rooms, and explore interior designs — no renovation needed.